I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING, a products division of
Milestone AV Technologies.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY
SAVAGE, MINNESOTA 55378 USA
8840-000040 RevC
2008 Milestone AV Technologies
A Duchossois Group Company
www.chiefmfg.com
12/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES
THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE
EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT
THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
INTERFACE IS 125 POUNDS (79.38 KG).
MSB-6053
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
(2) Interface Side Brackets
(2) Interface Center Brackets
(4) Mounting Buttons – Tapped
(8) 10-24 x .5 Button Head Cap Screws
(4) M8 x 65mm Hex Head Cap Screws
(4) 18mm x 8.3mm x 20mm Nylon Spacers
(4) M8 Flat Washers
(4) Nylon Shoulder Washers
(1) 1/8” Allen Key
(4) .74x.39x1.0” Nylon Spacers
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
NOTE: If installing screen on a Chief J-series wall mount, proceed to Step 3 (J-Series VESA Interface Installation).
1.
Chief Q-latch Button Installation (Used with MSR, MTR, MWH, MWR, MCS and MCD mounts):
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to center brackets (four places) (see
Figure 2 & Figure3).
2. Proceed to Step 4 (Side Bracket Assembly).
CAUTION!
Figure 1
WARNING!
Figure 2
Figure 3
