CHIEF M30, Инструкция по эксплуатации

Страница: 3 / 12

U
1N
=
I
2
=
I
2CC
=
1
～
50/60Hz
SPOT-X
SN
：
EN50063:1989
ISO 669:2000
U
20
=
s
S
max
=
Sn =
Weight=
3
ELECTROMAGNETIC COMPATIBILITY
This machine is manufactured in compliance with the instructions contained in the harmonized standard and must be used
solely for professional purposes in an industrial environment. There may be potential difficulties in ensuring electromag-
netic compatibility in non-industrial environments.
IN CASE OF MALFUNCTIONS, REQUEST ASSISTANCE FROM QUALIFIED PERSONNEL.
2. GENERAL TECHNICAL DESCRIPTIONS
2.1 SPECIFICATIONS
This manual has been prepared with the intent of instructing the operator on how to install, operate, and properly maintain
this spot welding machine.
Upon receiving and unpacking the machine, make a careful inspection to ensure there are no damaged parts.
Should there be a claim for losses or damages it must be made by the purchaser directly to the shipper who handled the
goods.
When requesting information about this welding machine please state the machine’s part number and serial number to
ensure receiving accurate information relating to your machine.
2.2 DESCRIPTION OF TECHNICAL SPECIFICATIONS
The contents are for your reference. Product may be updated without notice.
SPOT-X The model of the machine
SN Machine Serial Number which must appear on requests or inquiries concerning the machine.
CE ,EN ,ISO International standards
~ Alternating current (AC)
U20 Range of rated ac no-load voltage and number of adjustable steps
I2CC maximum short circuit current of the output corresponding to the minimum impedance
I2 Output welding current
1~50/60 Single-phase input supply at 50 or 60 Hz
U1N Rated supply voltage
Smax Maximum power
Sn Power at normal duty cycle
Weight Weight of the welding equipment