background image

 LTMPU

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies, and its affiliated corporations and 
subsidiaries (collectively “Milestone”), intend to make this 
manual accurate and complete. However, Milestone makes no 
claim that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Milestone 
makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Milestone assumes 
no responsibility for accuracy, completeness or sufficiency of 
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies. 
All rights reserved.

 IMPORTANT SAFETY INSTRUCTIONS!

WARNING:  

A WARNING alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION:  

A CAUTION alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 
corresponding instructions.

WARNING:  

Failure to read, thoroughly understand, and 

follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty! It is the 
installer’s responsibility to make sure all components are 
properly assembled and installed using the instructions 
provided.

WARNING:  

Failure to provide adequate structural strength 

for this component can result in serious personal injury or 
damage to equipment! It is the installer’s responsibility to 
make sure the structure to which this component is attached 
can support five times the combined weight of all equipment. 
Reinforce the structure as required before installing the 
component. The wall to which the mount is being attached 
may have a maximum drywall thickness of 5/8” (1.6cm) for 
wood studs.

WARNING:  

Exceeding the weight capacity can result in 

serious personal injury or damage to equipment! It is the 
installer’s responsibility to make sure the combined weight of 
all components located between the LTMPU up to (and 
including) the display does not exceed 200 lbs (90.7 kg).

WARNING:  

Use this mounting system only for its intended 

use as described in these instructions. Do not use 
attachments not recommended by the manufacturer.

WARNING:  

Never operate this mounting system if it is 

damaged. Return the mounting system to a service center for 
examination and repair.

WARNING:  

Do not use this product outdoors.

IMPORTANT ! : 

The LTMPU mounts are designed to be 

mounted to an 8" concrete, 8"x8"x16" concrete block or 2" x 4"  
wood studs (16" on center) wall.

--SAVE THESE INSTRUCTIONS--

Содержание LTMPU













Отзывы: