CHIEF LCM2X1U, Руководство по установке

Страница: 12 / 16

LCM2X1U / LCM2X1UP Installation Instructions
12
4. Fasten bracket against ceiling mount extrusion using one
10-24 x 5/8" button head cap screw (Y). (See Figure 11)
5. Repeat for other interface bracket.
Figure 11
6. While supporting both sides of second display, lower second
display onto other end of ceiling mount, hooking top of
interface brackets onto front of ceiling mount. (See Figure
10)
7. Repeat Steps 3 through 5 for second display.
Adjustments
CAUTION:
Watch for pinch points! Do not place fingers
between moveable parts.
Roll
The ceiling mounts allow up to 3° roll each direction.
1. Turn the roll adjustment bolt in the direction necessary for
the desired roll. (See Figure 12)
2. Stop adjusting when the desired setting is reached.
Figure 12
Tilt
The interface brackets allow -5° to 20° tilt, and can be locked at
0°, 10° and 20° tilt.
3. If necessary, loosen button head tilt friction bolt (located on
side of interface bracket). (See Figure 13)
4. Adjust tilt as required. (See Figure 13)
5. The tilt may be locked at 0°, 10° and 20° using one
10-24 x 2-1/4" Phillips head screw (X) and one 10-24 lock
nut (Z) per interface bracket. (See Figure 13)
6. Tighten button head tilt adjustment bolt as necessary.
Figure 13
4 (Y) x 2
5
1
Roll
adjustment
bolt
Lock at
Lock at
Lock at
Tilt
friction
bolt
3
4
6
(Displays not shown)
5
(X)
(Z)
0° tilt
10° tilt
20° tilt