K4G220-320
Installation Instructions
10
Height Adjustment
1.
Loosen socket head cap screws holding column arm to
column. (See Figure 13)
2.
Adjust column arm to desired height. (See Figure 13)
3.
Tighten socket head cap screws to lock column arm’s
position. (See Figure 13)
NOTE:
The height on both columns should be adjusted
simultaneously to ensure a level mount.
Figure 13
Faceplate Assembly Removal
1.
Remove socket head cap screw from bottom of faceplate
assembly. (See Figure 14)
2.
Slide out removable plate from bottom of faceplate
assembly. (See Figure 14)
Figure 14
3.
Remove faceplate assembly from array arm. (See Figure
14)
To Reattach Faceplate Assembly
4.
Place faceplate assembly on array arm at desired mounting
position. (See Figure 15)
5.
Slide removable plate back into slot at bottom of faceplate
assembly. (See Figure 15)
6.
Reinstall socket head cap screw removed in Step 1 to
secure faceplate assembly to array arm. (See Figure 15)
Figure 15
Lateral Shift
1.
Loosen knob on top of faceplate assembly until faceplate
can slide freely along array. (See Figure 16)
2.
Adjust lateral position as desired. (See Figure 16)
3.
Tighten knob to secure lateral position. (See Figure 16)
Figure 16
2
1
3
2
(K4G220 shown)
removable plate
1
2
3
removable plate
5
6
4
2
1
3
2
2
2
(K4G320 shown)
2
2
