Installation Instructions
K2P Series
11
Swing Arm Pivot Adjustment
1.
Adjust pivot position as desired. (See Figure 14)
2.
Adjust pivot point tension screws to change pivot
adjustment tension. (See Figure 14)
Figure 14
Cable Management
Non-Array Models
1.
Route cables through cable management channels. (See
Figure 15)
Figure 15
Array Models
1.
Install cable clips (J7) to back of array. (See Figure 16)
2.
Route cables through cable clips (J7) as desired. (See
Figure 16)
Figure 16
pivot point
tension
cable (typical)
1
1
1
(J7)
2
1
