Installation Instructions
K2C2OFB215
7
Pivot Adjustment Range
1.
Adjust arm angles as desired within a 90 degree range from
the edge of desk or wall and a perpendicular centerline of
mount. (See Figure 7)
Figure 7
Swing Arm Pivot Adjustment
1.
Adjust pivot position as desired. (See Figure 8)
2.
Adjust pivot point tension screws to change pivot
adjustment tension. (See Figure 8)
Figure 8
Lateral Shift
1.
Loosen two #10-32 x 7/8” flat head cap screws (F). (See
Figure 9)
2.
Adjust lateral shift position as desired. (See Figure 9)
3.
Tighten two #10-32 x 7/8” flat head cap screws (F). (See
Figure 9)
Figure 9
Cable Management
1.
Route cables through cable management channels. (See
Figure 10)
Figure 10
perpendicular centerline
90 degrees range
of motion per arm
FrameOne™ rail
(top view)
pivot point
tension
1
3
2
cable (typical)
1
1
1
