K1 Series
Installation Instructions
10
Connecting K1D Series (desk mount) to Desk
1.
Loosen clamp screw until enough space is created between
clamp and mount to allow for desk mounting. (See Figure 5)
NOTE:
If space is limited behind desk (i.e. against wall, etc.),
remove clamp entirely in Step 1 and reattach clamp
prior to Step 3!
2.
Place mount on top of desk at desired mounting location.
(See Figure 5)
3.
Tighten clamp using clamp screw until mount is securely
fastened to desk. (See Figure 5)
Figure 5
Grommet Hole Option
NOTE:
While the K1D Series mounts may be installed directly
to grommet holes as detailed here, it is recommended
that Chief’s KRA202 grommet accessory be used for a
more secure mount.
NOTE:
Depending on the depth and size of the grommet hole,
the clamp may not need to be totally removed from the
clamp but just loosened enough to manuever through
the hole. (See Figure 6)
Figure 6
1.
Remove desk clamp from mount by loosening button head
cap screw until clamp is completely disengaged from the
bolt. (See Figure 7)
2.
Manuever clamp so that it is totally removed from desk
mount. (See Figure 7)
Figure 7
3.
Locate a flat surface (thickness of 3/4" minimum to 3 1/2"
maximum) on which to mount the column plate.
4.
If mounting hole does not already exist on desk, drill
mounting hole in desk at desired mounting location.
IMPORTANT ! :
Mounting hole must be a minimum of
5/16" in diameter!
5.
Place mount on desk over grommet hole. (See Figure 8)
6.
Manuever desk clamp through grommet hole and into
mount. (See Figure 8)
7.
Reinstall button head cap screw into clamp and tighten until
secure. (See Figure 8)
Figure 8
1
1
2
3
desk
2
1
6
7
