JWDSK210
Installation Instructions
6
Figure 5
11. Place mount over anchors and align mounting holes
in display mount with holes in anchors. (See Figure 6)
12. Place flat washer (U) onto Phillips pan head screws
(V).
13. Insert Phillips pan head screws (V) with flat washer
(U) through mounting hole in display mount and into
anchor (W) and tighten until flush against mount. DO
NOT overtighten!
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Overtightening of
mounting hardware can damage the steel studs. DO NOT
overtighten mounting hardware!
Figure 6
Display Installation
The mounting holes on the back of your display will either be
flush with
the back surface, or
recessed into
the back surface.
Refer to the applicable installation procedure.
Flush Mount Display
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display! Proper screws will
easily and completely thread into display mounting holes.
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Inadequate thread
engagement in display may cause display to fall! Back out
screws ONLY as necessary to allow installation of Centris
bracket!
Display Installation
VESA 100 x 100 Pattern
1.
Partially install two screws (D) into upper mounting holes in
display back. (See Figure 7)
NOTE:
Leave at least 1/8" of each screw protruding out back
of display.
Figure 7
2.
Align two screws in display back with upper teardrop
mounting holes in mounting plate.
3.
Place two screws in display back into upper teardrop
mopunting holes in display mounting plate and lower
display until screws are seated in lower area of teardrop
mounting holes. (See Figure 8)
4.
Install two screws (D) through display mounting plate and
into lower mounting holes in display back. (See Figure 8)
Plastic Straps
Steel Stud
Drywall
Anchor Metal Channel
Plastic Cap
SIDE VIEW
Steel Stud
Drywall
Anchor Metal Channel
Display Mount
SIDE VIEW
(U) x 4
(V) x 4
1
(D) x2
Содержание JWDSK210
Страница 9: ...Installation Instructions JWDSK210 9...
