CHIEF Fusion FCA820 Скачать руководство пользователя страница 2

FCA820/821

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

DEFINITIONS

MOUNTING SYSTEM:

A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY:

AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT:

A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight
mounted to the FCA820/821 shelves does not exceed 10 lbs
(4.5 kg).

WARNING:

Use of this accessory will decrease the weight

capacity of the mounting system to which it is attached by the
combined weight of the accessory and all components
supported by this accessory! See Figure below for reference.

WARNING:

Use this accessory only for its intended use as

described in these instructions. Do not use attachments not
recommended by the manufacturer.

WARNING:

Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and
repair.

WARNING:

Do not use this product outdoors.

WARNING:

RISK OF INJURY TO PERSONS! Do not use

this accessory to support video equipment such as
televisions or computer monitors.

--SAVE THESE INSTRUCTIONS--

(weight capacity of mounting system) minus

(*weight of FCA820/821 shelf + shelf components)

10 lbs (4.5 kg)

*FCA820/821 shelf weighs

 7.2 lbs (3.27 kg)

weight capacity of accessory

Содержание Fusion FCA820













Отзывы: