CHIEF Fusion FCA115, Руководство по установке

Страница: 5 / 8

Installation Instructions FCA115
5
Assembly And Installation
Installing FCA115 Wall Plate to XTM1U/XSM1U
Mount
1. Remove caps from one side of mounting rails on XTM1U/
XSM1U mount. (See Figure 1)
Figure 1
2. Slide FCA wall plate (A) onto XTM1U/XSM1U mount rails.
(See Figure 2)
3. Reinstall caps onto mounting rails. (See Figure 2)
Figure 2
4. Position three wall plates 16" apart from each other on rails.
(See Figure 3)
Figure 3
Installing to a Wood Stud Wall
1. Determine the center of the TV screen, and where it should
be located on the wall.
2. Locate the closest stud to the selected location.
NOTE:
Center of display should be located either directly over
or near a stud.
3. Line up the notches on mount with center of screen marking
to determine vertical center. (See Figure 4)
4. Measure up 8" (203mm) from the center point to mark
location of the upper mounting slots.
Figure 4
1
3
2
2
2
16"
16"
Center of screen
8"
Vertical center
of mount
(203.2mm)