CHIEF FTR Series, Руководство по установке

Страница: 6 / 8

FTR Series Installation Instructions
6
NOTE:
An optional padlock may be used to secure latching flag
in place. (See Figure 8)
Figure 8
5. Connect cables to display as required.
Removing Display from Mount
1. Disconnect all cables from display.
2. Open latching flag by rotating flag clockwise on FTR.
3. Lift and maneuver display mounting buttons out of button
openings.
Adjusting Tilt
1. Loosen adjusting screws on each side of display (See
Figure 9).
2. Adjust tilt as desired.
3. Retighten adjusting screws.
Figure 9
NOTE: Display not shown for clarity.
5° Tilt Up
15° Tilt Down
1
2
3