CHIEF FMSWA, Руководство по установке

Страница: 9 / 12

Installation Instructions FMSWM / FMSWA
9
Mounting Rails
1. Slide height adjust plates (C) into open end of mounting rail.
(See Figure 10)
Figure 10
2. Hook height adjust plates (C) over wall uprights (A or B).
(See Figure 11)
NOTE:
Hook all height adjust plates (C) over wall uprights (A
or B), and approximately center mounting rail over the
span of the wall uprights (A or B)
BEFORE proceeding
to next step.
3. Fasten mounting rail to wall uprights using four 5/16 x 1/2"
Phillips flat head screws (D) through height adjust plate (C)
and into wall uprights (A or B) and tighten all screws. (See
Figure 11)
Figure 11
4. Attach one remaining end cap following FMSECAP
installation instructions.
Figure 12
Adjust and Level Mounting Rail
1. Adjust the height of the mounting rail via the wall upright, as
necessary, to level the mounting rail on the wall. (See
Figure 13)
•
Turn the wall upright height-adjust screw clockwise
(viewed from bottom) to raise the mounting rail.
• Turn the wall upright height-adjust screw counter-
clockwise (viewed from bottom) to lower the mounting
rail.
2. Adjust the depth of the mounting rail via the wall upright, as
necessary, to make the mounting rail distance from the wall
consistent.
• Loosen depth-adjust button head screws, and move
mounting rail away or toward the wall, as necessary.
• Tighten depth-adjust button head screws.
IMPORTANT ! : Be sure to securely tighten depth-adjust
screws after adjustment.
Figure 13
1
(C)
Mounting rail
(front view of rail)
3
(D) x 4
2
2
(C)
(A)
(front view of rail)
(back view of rail)
Height-adjust
screw
Depth-adjust
screws x 4
(Front view)