CHIEF EZ LINER EXPRESS, Руководство пользователя

Страница: 16 / 32

16
EZ LINER EXPRESS
USERS MANUAL
M20 Height
Adjustment Screw
Tower Insert Plug
Handles
Mounting Port
Tower/Mainframe Pin
Pin Hole
M20 Height
Adjustment Screw
M20 Height
Adjustment Screw
Remove The Tower/Mainframe Pin
Prior To Pulling
IMPORTANT
XII. Raise Lift and Vehicle to Pulling Height and Lower Stabilizating Legs
1. Raise the lift and vehicle by pressing the pump portion of the pedal on the Lift Pump until the all of the Stabilization Legs can fall
and become completely vertical (see Figure 31).
STABILIZING LEG
Figure 31
Figure 32
2. Pull the spring-loaded release pin on the leg to allow the leg to lower to a vertical position.
3. Lower the lift and vehicle unto the Stabilization Legs by pressing the Release portion of the pedal on the Lift Pump.
XIII. Tower Usage
Do not raise machine with tower installed.
CAUTION
To prevent personal injury from flying objects:
1) Check all bolts, nuts and clamps for deformationor elongation prior to each use.
2) Deformed or elongated materials must be replaced! If they look deformed, they are deformed.
1. Push Tower (using handles) toward the tower mounting port on the mainframe (see Figure 32). Raise or lower the tower by
tightening or loosening each M20 tower height adjustment bolt ( 4 total, see Figure 33) so that the insert plug on the tower is at
the same height as the mounting port of the mainframe.