CHIEF ERS10, Руководство по установке

Страница: 5 / 8

Installation Instructions ERS10
5
ASSEMBLY
1. Use eight #10 x 5/8" wood screws (H) to secure two 10-
space rack rails (E) to two side panels (A and B). (See
Figure 1)
2. Secure rack top (C) to one side panel using two M7x50mm
Phillips confirmat screws (G). Do not over tighten! (See
Figure 2)
3. Secure the rack bottom (D) using two M7x50mm Phillips
confirmat screws (G). Do not over tighten! (See Figure 2)
4. Secure cross brace (F) to the front of the side panel using
two M7x50 Phillips confirmat screws (G). (See Figure 2)
5. Install six caps (J) to installed confirmat screws (G). (See
Figure 2)
6. Install remaining side panel (A) to the other side following
Steps 2-5.
7. Install components to rack as desired.
Figure 1
(H) x 8
(B)
1
(A)
(E) x 2
Figure 2
(F)
(C)
2
(G) x 2
(J) x 7
5
3
(G) x 2
4
(G) x 4
(B)
(A)
(D)