Installation Instructions
CMA170
7
NOTE:
In a sample installation, install components into the
CMA-170 in the following order (See Figure 8):
1.
CPU;
2.
Remote control;
3.
Cables should be installed and run through the cable
access holes;
4.
Power supply.
Figure 8
Securing CMA-170
1.
Add the door to CMA-170 by placing the top tab into the slot
on top of CMA-170. (See Figure 9)
2.
Swing the door bottom into place. (See Figure 9)
Figure 9
3.
Fasten CMA-170 door closed with two 10-24 x 1/4" button
head cap security screws (F). (See Figure 10)
NOTE:
Phillips head screws (L) are provided if security screws
are not required. Security screws can also be removed
from the other CMA-170 door and replaced with the
Phillips head screws (L).
Figure 10
1
2
3
4
Run
Cables
2
1
CPU
(A)
Slot
3
(F) x 2
(A)
