background image

CHIEF MANUFACTURING INC. 

8810-000010 (Rev. A) 

1-800-582-6480

  952-894-6280 FAX 952-894-6918 

©2005 Chief Manufacturing 

8401 EAGLE CREEK PARKWAY, STE. 700 

www.chiefmfg.com

 

SAVAGE, MINNESOTA 55378  USA 

10/05 

I N S T A L L A T I O N       I N S T R U C T I O N S  

CABLE LOCK KIT 

LC-1   &  LC-1-12 

 
The cable lock kit is used as a projector accessory. The kit 
includes a coiled cable that extends to the applicable 
length, two steel security pads, a 2-gram tube of super glue 
gel, and a 30mm padlock. 
The cable lock kit is supplied in two models numbers: 

• 

LC-1

 

Coiled cable, extends six feet. 

• 

LC-1-12

 

Coiled cable, extends 12 feet. 

PARTS 

 
 

 

 
 
 

Figure 1. Parts  

PARTS LIST 

Unpack the shipping carton and check for the contents 
listed in Table 1 and shown in Figure 1. 

Table 1. Parts List 

  

LC-1 

LC-1-12 

REF DESCRIPTION QTY 

QTY 

10A 

COILED CABLE, 6 feet 

 

10B 

COILED CABLE, 12 feet 

 

20 

SECURITY PADS, steel 

30 

SUPER GLUE GEL, 2-grams 

40 PADLOCK, 

30mm 

50 KEY, 

padlock 

60 

PREP PAD, Alcohol 

 

INSTALLATION 

To install the coiled cable (10A or 10B), do the following: 
1.  Locate the two flat surfaces where the security pads 

(20) will be installed. 

2.  Clean the two flat surfaces using the alcohol prep pad 

(60). 

WARNING: Before using the super glue gel, read 

the printed instructions on the tube carefully to avoid 
personal injury.  

3.  Apply super glue gel (30) onto the cleaned flat surface 

where the first security pad (20) will be placed. 

4.  Place the security pad (20) onto the cleaned surface. 

5.  Apply pressure onto the pad, as needed. 

6.  Repeat Steps 3 through 5 to install the second security 

pad (20). 

7.  Connect coiled cable (10A or 10B) to security pad 

(20) using the padlock (40). Retain the keys (50). 

20 

30

10A 

OR

 10B 

40 

50 

60 

20

Отзывы: