Attach the Cup Holders to the Child Restraint.
Match the “R” and “L” Cup Holders to the Child Restraint, as shown.
Make sure the fabric is tucked in along the Child Restraint lip to allow the Cup Holder to be attached properly. Line up
the Cup Holder pin and the two guides with the openings on the Child Restraint, as shown. Push in and then push down
on the Cup Holder until it clicks into place. Repeat for the other side.
33
R
L
Pin
Guide
If desired, attach the Crotch Strap Pad.
Thread the
Crotch Strap Pad tongue down into the same opening as the
Crotch Strap.
32
8
9
At the back edge of the Headrest
locate the plastic
tabs. Press them into the Headrest frame until they click
into position, as shown.
27
Attach both snap buttons on the Headrest fabric to
the Headrest frame, as shown.
Then pull the Harness
Straps around to lay on top of the Headrest fabric.
28
Attach both snap buttons on the seat fabric, as shown.
Pull the Headrest up to the highest position. Slide the
Headrest fabric onto and around both sides of the Headrest frame.
Tuck the fabric edges into the Headrest frame
edges, as shown.
26
If desired, attach both sides of the Hook and Loop
Tabs
on the outside of the Shoulder Pad, as shown.
Repeat for the other Shoulder Pad.
30
Slide both Headrest Insert tongues
into the side
pockets on the Headrest.
29
For child weighing between 5 and 11 lbs (2.3 and 5
kg),
place the Newborn Positioner on the Child Restraint.
Thread the Harness Straps into the side openings on the
insert pad and thread the Harness Buckle up into the
slot in the pad.
31
Learn how to
INSTALL & USE
The
OneFit Car Seat
ChiccoOnefit.com
