Chicco KeyFit 30 Zip Скачать руководство пользователя страница 2

        

Pull Seat Pad

 away from the Adjuster Cover as 

shown.

Hint:

 To help remove the Seat Pad, pinch the fabric 

above the Adjuster Cover and pull forward.

9

        

Pull the side of the Seat Pad

 up and slide the 

Harness Strap behind the Seat Pad at the shoulder and 
the waist, repeat for the other Harness Strap.

10

        

Make sure the Harness Straps

 are completely tucked 

behind the back of the Seat Pad and remove the Seat Pad.

Make sure back piece of the Seat Pad is properly 
tucked into the softgoods when re-attaching the 
Seat Pad.

11

        

BOOT:

 

To remove, undo the snap button 

located on the side of Boot.  Repeat for other side.

4

        

Remove the boot. 

 Guide the section from under 

the front edge of the seat and lift up and remove the 

boot.

5

2

3

        

Unhook the elastic band

 attached around handle 

pivot, repeat for the other side.

8a

        

Pull out plastic tabs

 located on both sides of the 

seat pad.

8b

SOFTGOODS REMOVAL:

  

PARTS LIST:

A.  Newborn Positioner
B.  Headrest Insert
C.  Shoulder Pads
D.  Crotch Strap Pad
E.  Boot

A

B

C

D

E

TO REMOVE THE SEAT PAD:

 

Completely loosen the harness straps. Remove the Boot 

(See Steps 4-5)

.  Remove the Crotch Strap Pad 

(See Step 6)

.  Refer to User Guide to remove the Canopy, Headrest Insert and Newborn Positioner 

(See Step 7)

.  

Remove the Seat Pad 

(See Steps 8-11)

.

        

CROTCH STRAP PAD:

 

Unbuckle the Harness 

and remove Crotch Strap Pad by locating the Tab and 
pushing it through the Harness Buckle.  Pull the Tab out 
through the front of the Harness Buckle and remove.

6

IMPORTANT!  If the Crotch Strap Pad prevents the harness from properly 

fitting a small Infant, remove immediately and store for future use.

        

Refer to user guide

 to remove the 

Canopy, Headrest Insert and Newborn 

Positioner.

7

Fabrics may be spot-cleaned with mild soap and 

water, or machine washed in cold water on delicate 

cycle using mild detergent. Hang to dry. 

DO NOT 

BLEACH.

Please consult your product manual for instructions 

on additional care and maintenance instructions.

CLEANING 
INSTRUCTIONS:

       

 To reinstall softgoods,

 follow steps 4-11 in reverse. 

 

IMPORTANT! 

Make sure all softgoods are properly 

installed before use.

12

Отзывы: