www.chiccousa.com
Before attempting to operate the Electronic
Module, install 3 “AA” batteries. Use a Phillips
screwdriver to unfasten battery cover and
remove.
Install 3 “AA” batteries matching the polarity indicated
inside battery compartment. Re-attach the battery cover.
+ - +
- + -
Attach the Clip-on Module on the bassinet top rail.
Position it on the side closest to you so it can be oper-
ated without reaching over the baby. Make sure the
light faces towards the inside of the bassinet. Press
down gently ensuring that it is resting securely in
place. DO NOT force.
TO ATTACH NIGHT LIGHT:
2
1
NIGHT LIGHT USE:
VIBRATION: Press the VIBRATION ( ) button to activate.
The vibration has two stages: press once for low setting, press a
second time for high. When the VIBRATION ( ) button is “ON” the
Electronic Module will gently vibrate for about 10 minutes before
automatically turning off. You can turn off vibration by pressing the
vibration button a third time.
NIGHT LIGHT: Press the LIGHT ( ) button to turn the Lights
“ON” or “OFF”. When the light is “ON” it will automatically turn
off in 10 minutes.
MELODIES: Press the Music Note ( ) button to start the 6
different tracks of music. When Music Note is on it will play for a 10
minutes then automatically turn off. To cycle through the 6 tracks
press the Music Note ( ) button once to skip to the next track.
VOLUME: Press the volume (+/-) buttons positioned on each side
of the ON/OFF button to increase or decrease the volume. The plus
(+) sign increases volume and the minus (-) sign decreases volume.
3
4
Press the ON/OFF ( ) button once to turn
“ON” the Electronic Module. The LED light will
illuminate to indicate the Electronic Module is
on. Press it again to turn the Electronic Module
“OFF”.
INSTALL BATTERIES:
