Chicco BABY GYM DELUXE, Руководство пользователя

Страница: 9 / 64

8 9
the locking button and fit the leg of the electronic panel; a click is heard, indicating that it has
locked into position.
3. Repeat the operation with the other 3 legs (diag. C).
4. Hold the support base, as shown in diagram D (The curved part must remain in the external posi
-
tion). Press the side buttons, located in the lower part of the leg, fit the support base into slot A,
until a click is heard, indicating that it has locked into position.
5. Repeat the operation with the other leg. Take hold of the other support base and repeat the opera -
tion with the other 2 legs (diag. E).
6. Place the gym on the floor, onto the support bases (diag. F). Turn the fixed electronic panel until the
arrow marked on the panel’s shoulder corresponds to symbol 1, located on the panel (F-1).
7. Once the panel has been inserted correctly into the slot, fix it turning the side knob in a clockwise
direction, until the symbol has been reached (diag. G). A click will indicate that the panel is cor -
rectly locked into position.
8. Lower the fastening fixtures, located on the lower part of the panel (diag. H).
9. Fasten the swinging toy by sliding the fabric fastener inside the fastening fixture (diag. I).
10. Fasten the fabric fastener tightly, sliding it into the fastening fixture, as shown in diagram I, and
adjust it according to the child’s height.
11. Repeat the operation with the other 2 swinging toys. The gym will look as shown in diagram L.
Changing the Play Position from No. 1 to No. 2
1. Remove the 3 swinging toys, taking off the fabric fastener from the fastening fixture.
2. Press the safety button, located at the base of the knob, and, at the same time, turn the knob in an
anticlockwise direction, positioning it vertically on the symbol (diag. M).
3. Repeat the operation on the other side.
4. Turn the fixed electronic panel to the initial position, as shown in diag. M;
5. Place the gym onto the floor, as shown in diagram N. Remove the support bases, by pressing the
side buttons located on the lower part of the legs.
6. Press the button, located at the side of the electronic panel’s shoulder, and remove the leg as shown
in diagram O.
7. Repeat the operation with the other 3 legs.
8. Fit the shoulders of the electronic panel into slots B of the support base; a click is heard, indicating
that they have locked into position (diag. P).
9. Repeat the operation with the other support base (diag. Q).
10. Place the gym on the floor, onto the support bases (diag. R). Turn the 2 panels externally, one at a
time, until the arrow marked on the shoulder corresponds to symbol 2, located on the panel.
11. Once the panel has been inserted correctly into the slot, fix it turning the side knob in a clockwise
direction, until the symbol has been reached (diag. S). A click will indicate that the panel is cor -
rectly locked into position.
12. If the toy has been assembled correctly, the multi-activity panel in position 2 should look as shown
in diag. T.
Changing the Play Position from No. 2 to No. 3
1. Press the safety button, located at the base of the knob, and, at the same time, turn the knob in an
anticlockwise direction, positioning it vertically on the symbol (diag. M).
2. Repeat the operation on the other side.