SKU 95497 For technical questions, please call 1-800-444-3353 PAGE 15
the safe operation of the tool. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.
3.
Saw Chain (77) maintenance: A dull, improperly sharpened, or damaged Saw
Chain can cause kickback, leading to possible personal injury. It is recommended
that only a qualified service technician attempt to sharpen the Saw Chain.
4.
Spark Plug (11A) maintenance: The condition of the Spark Plug should be
checked every six months or 100 hours of tool use. If necessary, reset the gap
and clean the old Spark Plug or gap and replace with a new Spark Plug.
(See Figure F.)
6.
To install a replacement Saw Chain (77): Refer to page 9 of this manual for
complete instructions.
7.
To clean the Chain Saw: Use only a clean cloth and mild detergent. Do not
use solvents as doing so may damage the finish of the tool. Do not introduce
liquids into the internal parts of the Engine and Carburetor.
5.
Air Filter (66A) maintenance: The Air Filter should be checked prior to each
use of the Chain Saw for excessive dirt and debris build-up. Thereafter, the
Air Filter should be cleaned or replaced every three months or 50 hours of tool
use.
0.025”
RECOMMENDED
SPARK PLUG TYPE:
CHAMPION® RCJ - 6Y or equivalent
FIGURE F
8.
When storing the Chain Saw: Before storing, drain all fuel out of the tool’s Fuel
Tank. If this is not followed, old fuel in the Fuel Tank may clog the Carburetor
and prevent the tool from starting until cleaned out. Then store the tool in a
clean, dry, safe location out of reach of children and other unauthorized
people.
9.
CAUTION! All maintenance, service, or repairs not mentioned in this
manual must only be performed by a qualified service technician.
