SKU 65939
For technical questions, please call 1-800-444-3353.
Page 2
Keep assembly area clean and well lit.
3.
Keep bystanders out of the area during as-
4.
sembly.
Do not assemble when tired or when under
5.
the influence of drugs or medication.
use precautions
Avoid working alone. If an accident occurs,
1.
an assistant can get help.
This product is not a toy. Do not allow chil-
2.
dren to play with or near this item.
Use for intended purpose(s) only.
3.
Always store acetylene and oxygen tanks
4.
away from flammable materials and heat
sources.
Inspect before use; check welds for cracks.
5.
Wear the proper face mask and gloves for
6.
welding purposes.
Make sure tanks are securely strapped to the
7.
cart.
Store and use this cart only on flat and level
8.
surfaces.
After welding, make sure gas valves are
9.
securely tightened.
Read and understand the warnings and
10.
instructions provided by the manufacturer of
the welding equipment being used.
Maintenance should be performed by a quali-
11.
fied technician.
Maintain product labels and nameplates.
12.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
assemblY InstructIons
read the entIre Important
saFetY InFormatIon section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
Fig. 1
Baffle
Board (11)
Bottom
Tray
Axle
Brackets (7)
Tank Frame (4)
1.
Start with the welded Tank Frame (4) as this
is where everything else attaches.
Axle
Brackets (7)
Tank
Frame (4)
Axle (6)
Tool Tray
Bracket
(2)
Handle
(1)
Tool
Tray (3)
Fig. 2
2.
Line up the holes of the Handle (1) and the
Tool Tray Bracket with the holes at the upper
sides of the Tank Frame (4).