Chicago Pneumatic S-type, Инструкция по эксплуатации продукта

Страница: 7 / 124

Reaction Bar EN Operation
© Chicago Pneumatic - 6159923720
7
Operating Instructions
Operating the tool with reaction bar
1. Attach the tool to the application.
2.
WARNING Be aware that the reaction bar will turn in the opposite direction to the tool.
By using the reverse lever, the tool can be operated in both clockwise and counter-clockwise directions.
3. Make sure the tool is placed in the correct position on the work surface as described in the picture. The end sur-
face of the reaction bar and the socket/nut must be aligned. Make sure that the foot of the reaction bar hits the
center of the nut that takes the reaction force.
4.
WARNING Never put your hand on or close to the reaction bar while the tool is being used.
Press the push button to start the tool.
5. Continue pressing the push button while running down the nut. With pneumatic tools you can hear a sound,
while the tool is running the nut down. When the sound decreases, release the push button to stop the tool. With
electric tools the run down of the nut is controlled by the Power Focus.