Chicago Pneumatic CPVS 20, Инструкция по эксплуатации

Страница: 13 / 28

Chicago Pneumatic Compressors
62 305 454 65
01/2008
Page 13
1) Upper screen: indicates the compressor pressure
2) Lower screen: indicates temperature, total hours, hours charged
3) Compressor purge button
4) Tabulator button to move on to the next display screen Item. 2
5) Board setting buttons
Symbole Désignation
Pressing this button to delete the saved alarm display. Keeping the button pressed down for over 3 seconds, a
station check test is performed, all LEDs must be lit.
Pressing this button starts the compressor. The start up is delayed for approximately 15 seconds.
Pressing this button start the stopping process for the compressor: the compressor operates with no load for a
few seconds before stopping.
Operation status indicator LED "RED" indicator lights (causing the machine to stop)
Symbol Flashing LED LED on
Overpressure alarm on Machine stopped due to overpressure
Wrong rotary way : in progress Wrong rotary way
Oil temperature too high alarm on Machine stopped to oil temperature too high
Deactivated Deactivated
Motor heat alarm on Machine stopped due to motor heat intervention.
General alarm on due to breakage to pressure and -
temperature sensor.
N.B. Press "Reset" to switch off red indicator lights
Compressor operation status indicator LED : "Yellow" indicator lights (not stopping the machine).
Symbol Flashing LED LED on
Deactivated Deactivated
Replace oil filter warning Replace oil filter
Replace separator filter warning Replace separator filter
Replace aspiration filter warning Replace aspiration filter
Oil empty warning Empty oil
General check warning Carry out a general check
N.B. See Section C - 5 to switch off " YELLOW " indicator lights
Compressor operation status indicator LED : "GREEN" indicator lights
(7)
(6)
(5)
(B)
(C)
(D)
(E)
(F)
(G)
(A)
(H)
(I)
(L)
(M)
(N)