1. Technical data (see Fig. 3)
L
W
H
max pressure 6.3 bar (90 psi).
a
hd
: Vibration level,
k
Uncertainty ;
L
pA
Sound pressure level dB(A),
K
pA
= K
WA
= 3 dB
Uncertainty
Declaration of noise (ISO 15744) and vibration emission (ISO 28927-2):
All values are current as of the date of this publication. For the latest information please visit www.cp.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the
user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.
We, CHICAGO PNEUMATIC TOOLS
in an individual risk assessment in a work place situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found at
www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf
We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures
2. Machine type
This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
Please read the product safety information carefully!
Use this impact wrench only with impact rated sockets operating upon threaded fasteners.
3. Implementation and Operation
Connect device as shown in Fig.1 to a clean and dry air supply.
Fix the accessories properly to the tool.
To switch rotation, turn the switch (B) shown in Fig. 2.
To start the machine, simply pull the trigger (A) shown in Fig. 2. Release the trigger to stop.
Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the machine.
4. Lubrication
Motor
Clutch
Use an air line lubricator with SAE #10 oil, adjusted to two (2) drops per minute.
5. Maintenance
Follow local country environmental regulations for safe handling and disposal of all components.
High wear parts are underlined in the parts list.
To keep downtime to a minimum, the following service kits are recommended:
6. Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
Repair only by technical maintenance staff.
7. Declaration of conformity
We:
CHICAGO PNEUMATIC Tool Co. 1800 Overview Drive Rock Hill, SC 29730 - USA
Declare that the product(s):
Impact Wrench
Machine type(s):
Serial Number:
From 00001 to 99999
Origin of the product:
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating: to “Machinery“
2006/42/EC
(17/05/2006)
Applicable harmonised standard(s):
EN ISO 11148-6:2012
Name and position of issuer: Nicolas Lebreton (R&D Manager)
Place & Date: Saint-Herblain,
France
Copyright 2014, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations,
part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or
Product Liability.
ORIGINAL INSTRUCTIONS.
EN
English
Impact Wrench
CP0611-RTL
1
2
3
4
5
6
7
8
9
10
11
12
[inch]
[ft.lbs]
[Nm]
[ft.lbs]
[Nm]
[inch]
[mm]
[inch]
[mm]
[inch]
[mm]
[inch]
[min-1]
[lb]
[kg]
[SCFM]
[Nl/s]
[dB(A)]
[dB(A)]
[m/s
2
]
[m/s
2
]
Drive
Torque
Max
Working
Max
Speed
Weight
Bolt
capacity
Inner
Hose
Dia.
Dimensions
L x H x W
Air
consumption
At load
Air inlet
Vibrations
ahd
k
Sound
Pressure
L
pA
Sound
Power
L
wA
If an air line lubricator cannot be used, add air motor oil to the inlet once a day.
Check clutch oil once each month.
Use 2.0 oz. (59ml) of SAE #30 oil or equivalent.
Higher pressure drastically reduces tool life.
Disassemble and inspect air motor and impacting clutch every three (3) months if the tool is used every day. Replace dammaged or worn pa
C115811 Tune-Up Kit
CP0611-RTL
USA
17/07/2014
Содержание CP0611-RTL
Страница 4: ...www cp com ...
