background image

 

10

8. Servicing Lights in Nose Cone 

Remove the screws that hold the 

Nose Cone

 to the 

Cabinet

 

With the help of another person, lift the 

Nose Cone

 up without removing it.  Disconnect the 

Chase Top 

Cable 

to free the 

Nose Cone

Remove the 

Nose Cone

 and set it on the floor, protecting it from damage.  Be very careful not to hit the 

Projector

 or 

Mirror Box

 when removing the 

Nose Cone

If one of the 

LED Boards

 was not working, check that the cables connected to the boards in the 

Nose 

Cone

 have not become disconnected. 

If replacing a 

CCFL Tube

, remove the white lamp guard to access the bad bulb. 

 

9. Extending Lamp Life: Economy Mode

 

The lamp in the projector will normally last from 3,000 to 4,000 hours.  To extend the 
life of the lamp, you can change the projector to Economy Mode.   

Economy Mode reduces the projector’s power consumption by 20% and increases 
the life of the bulb by 1/3.  This will make the projected image darker, which might 
make the game’s screen harder to see in areas with bright ambient light. 

To set the projector to Economy Mode, use either the remote or the buttons on the 
projector to enter the projector’s menu.  Go to System Setup: Advanced.  Select 
Lamp Settings, then Lamp Mode.  Use Left or Right to turn Economy Mode on or off.  
Press Menu again to exit. 

See 

pages 20-21 

for more information on Economy Mode and when to change the 

lamp. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Number 

000-LMP-RLC047

Содержание GalacTix



















































Отзывы: