Chicago Electric BREAKER HAMMER 94882, Руководство по сборке и эксплуатации

Страница: 4 / 16

SKU 94882 PAGE 4
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes,
jewelry, or long hair can be caught in moving parts.
12.
Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Carrying power tools with your finger on the Power Switch, or plugging in power
tools with the Power Switch on, invites accidents. Make sure you are prepared to
begin work before turning the Power Switch (62) “ON”.
13.
Remove adjusting keys or wrenches before turning the power tool on.
A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
14.
Do not overreach. Keep proper footing and balance at all times.
Proper footing
and balance enables better control of the power tool in unexpected situations.
15.
Always wear eye, hearing, and breathing protection.
Wear ANSI-approved
safety impact eye glasses, ANSI-approved hearing protectors, and ANSI-
approved dust mask or respirator when using this product. Also, non-skid
safety shoes and a hard hat must be used for appropriate conditions.
TOOL USE AND CARE
16.
Do not use the power tool if the Power Switch does not turn it on or off.
Any
tool that cannot be controlled with the Power Switch is dangerous and must be
replaced or repaired.
17. Disconnect the Power Cord Plug from the power source before making
any adjustments, changing accessories, or storing the tool.
Such
preventive safety measures reduce the risk of starting the tool accidentally.
18.
Store idle tools out of reach of children and other untrained persons.
Tools
are dangerous in the hands of untrained users.
19.
Maintain tools with care. Keep cutting tools sharp and clean.
Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
20.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
21. Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous when
used on another tool.