Chicago Electric 98391, Инструкции по установке, эксплуатации и обслуживанию

Страница: 12 / 42

SKU 98391 For technical questions, please call 1-800-444-3353. Page 12
Turn the ignition key to the off posi- 1.
tion.
Push down on the fuel shut off lever
2.
to release the Control Handle (13).
Turn the fuel valve to its “OFF” posi - 3.
tion.
start procedure
Before starting the engine:
Follow the set up instruc- a.
tions to prepare the equip-
ment.
inspect the equipment and b.
engine.
Fill the engine with the prop- c.
er amount and type of fuel
and oil.
read the equipment opera- d.
tion section that follows.
to start the engine:
Unplug all loads from the Generator 1.
before starting to prevent permanent
damage to any appliances or tools.
Depress the Decompression Handle
2.
(16) all the way (Cold starting only).
Open the front 3.
panel and turn the fuel shut-off valve
to its “OPEN” position.
Rotate the Control Handle (13) to the 4.
right until release button on the Right
hand side of the Handle Bracket (12)
pops up and locks in place.
Insert the en- 5.
gine key into the ignition and turn it to
“START” position for up to 10 sec -
onds. Note: To prolong starter life,
use short starting cycles (10 seconds
maximum). If the engine does not
start, wait one minute before attempt-
ing to start again.
Break-in period
Breaking-in the engine will help to 1.
ensure proper equipment and engine
operation, and will extend the en-
gine’s lifespan. The warranty is void
if the engine is not broken in properly.
The first 20 hours of operation is the
break-in period.
During the first 3 hours of use: 2.
Do not apply a heavy load to the •
equipment.
After the first 20 hours of use: 3.
Change the engine oil. •
Under normal operating conditions
subsequent maintenance follows the
schedule explained in the MAINTE-
NANCE AND SERVICING section.
Decompression
Handle
Release
Button
Control
Handle