Page 10
For technical questions, please call 1-888-866-5797.
Item 98265
SAFET
y
O
PERA
TION
M
AINTENAN
c
E
SETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURy FROM AccIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before performing any procedure in this section.
TO PREVENT SERIOUS INJURy:
DO NOT OPERATE WITH ANy GUARD DISABLED, DAMAGED, OR REMOVED.
Moving guards must move freely and close instantly.
Installing a Blade
1. Disconnect the power supply.
2. Push the carriage to the open end of the water tray
to the right of where the Worktables end (D06).
3. Remove the three Screws (A28) that hold the
Clear Guard to the Blade Guard. See Figure C.
4. Put the flat wrench over the Outer Flange (A33)
to keep the Blade from turning. Remove the
Arbor Bolt (A32) by turning it counterclockwise.
5. Remove the Blade (if installed) and replace with a
new one. The new Blade must be 7″ in diameter
with a 5/8″ arbor, free of openings and grooves,
and rated to at least 5,000 RPM. Match the arrow
on the Blade with the arrow on the Blade cover.
6. With the flat wrench in place again, reinstall the
Arbor Bolt, tightening it securely clockwise.
7. Replace the Clear Guard and secure
with the three Screws.
Figure c
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Содержание 98265
Страница 1: ......
