SKU 98058
For technical questions, please call 1-800-444-3353.
Page 14
troubleshooting
problem
possible Causes
likely solutions
Tool will not start
No power at outlet.
1.
Cord not connected.
2.
Tool overheated.
3.
Carbon Brushes need
4.
replacement.
Check power at outlet.
1.
Check that cord is plugged in.
2.
Allow tool to cool completely before
3.
continuing.
Replace Carbon Brushes.
4.
Cut quality is poor.
Blade damaged or dull.
1.
Blade not installed properly.
2.
Blade being forced into
3.
workpiece.
Replace Blade.
1.
Secure Blade properly.
2.
Cut more slowly.
3.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
please read tHe FOllOwing CareFully
THE MAnufACTurEr And/Or diSTribuTOr HAS PrOvidEd THE PArTS LiST And ASSEMbLy
diAgrAM in THiS MAnuAL AS A rEfErEnCE TOOL OnLy. nEiTHEr THE MAnufACTurEr Or
diSTribuTOr MAkES Any rEPrESEnTATiOn Or WArrAnTy Of Any kind TO THE buyEr THAT
HE Or SHE iS quALifiEd TO MAkE Any rEPAirS TO THE PrOduCT, Or THAT HE Or SHE iS
quALifiEd TO rEPLACE Any PArTS Of THE PrOduCT. in fACT, THE MAnufACTurEr And/Or
diSTribuTOr ExPrESSLy STATES THAT ALL rEPAirS And PArTS rEPLACEMEnTS SHOuLd bE
undErTAkEn by CErTifiEd And LiCEnSEd TECHniCiAnS, And nOT by THE buyEr. THE buyEr
ASSuMES ALL riSk And LiAbiLiTy AriSing OuT Of HiS Or HEr rEPAirS TO THE OriginAL
PrOduCT Or rEPLACEMEnT PArTS THErETO, Or AriSing OuT Of HiS Or HEr inSTALLATiOn
Of rEPLACEMEnT PArTS THErETO.
