Chicago Electric 96904 Скачать руководство пользователя страница 2

Страница: 2 / 12

Page

SKU 96904

For technical questions, please call 1-800-444-3353.

SaVe THiS manual

Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in

the back of the manual near the assembly diagram (or month and year of purchase if

product has no number). Keep this manual and the receipt in a safe and dry place for

future reference.

impoRTanT SaFeTY inFoRmaTion

in this manual, on the labeling, and all other information

provided with this product:

This is the safety alert symbol. it is used to alert you to potential personal

injury hazards. obey all safety messages that follow this symbol to avoid

possible injury or death.

DanGeR indicates a hazardous situation which, if not

avoided, will result in death or serious injury.
WaRninG indicates a hazardous situation which, if not

avoided, could result in death or serious injury.
CauTion, used with the safety alert symbol, indicates a

hazardous situation which, if not avoided, could result

in minor or moderate injury.
noTiCe is used to address practices not related to

personal injury.
CauTion, without the safety alert symbol, is used to

address practices not related to personal injury.

DanGeR

WaRninG

CauTion

Notice

CauTion

Содержание 96904












