SKU 96299
For technical questions, please call 1-800-444-3353.
PAGE 6
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facil-
ity before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
Tools marked with “Grounding Required” have a three wire cord and three prong
1.
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock.
(See Figure A.)
The grounding prong in the plug is connected through the green wire inside the
2.
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached to
an electrically “live” terminal.
(See Figure A.)
Your tool must be plugged into an appropriate outlet, properly installed and grounded
3.
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration.
(Se Figure A.)
FIGURE A
FIGURE B.
DOUBLE INSULATED TOOLS: WITH TWO PRONG PLUGS
Tools marked “Double Insulated” do not require grounding. They have a special
1.
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code.
(See Figure B.)
