SKU 94488
For technical questions, please call 1-800-444-3353
PAGE 16
Remove the Spark Plug Wire (18). Then, unscrew and remove the Spark Plug
(2B).
(See Figure E.)
Clean off the carbon build-up on the Spark Plug (2B).
(See Figure E.)
Check the electrode gap to see if it is 0.020”. If necessary, readjust.
(See Figure E.)
Replace the Spark Plug (2B) after every 100 operating hours, or earlier if the
electrodes are badly eroded (a Bosch WSR 6 F
or
NGK BPMR 7A is recom-
mended for replacement).
(See Figure E.)
Replace the Spark Plug (2B), Spark Plug Wire (18), and Spark Plug Cover (4D).
(See Figure E.)
SPARK PLUG
(2B)
SPARK PLUG WIRE
(18)
0.020”
SPARK PLUG
COVER
(4D)
FIGURE E
When storing the Saw, make sure to store the unit in a clean, dry, safe location
out of reach of children and other unauthorized people. For long periods of storage,
drain and clean the Fuel Tank (2C, 10C).
CAUTION! All maintenance, service, or repairs not mentioned in this manual
must only be performed by a qualified service technician.
b.
c.
d.
e.
f.
6.
7.
