background image

SKU 93142

        For technical questions, please call 1-800-444-3353

PAGE 3

3.

Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.  Protect others in the work area from
debris such as chips and sparks.  Provide barriers or shields as needed.

ELECTRICAL SAFETY

1.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators.  

There is an increased risk of electric shock if your body is

grounded.

2.

Do not expose power tools to rain or wet conditions.  

Water entering a power

tool will increase the risk of electric shock.

PERSONAL SAFETY

1.

Stay alert.  Watch what you are doing, and use common sense when operating
a power tool.  Do not use a power tool while tired or under the influence of
drugs, alcohol, or medication.

  A  moment of inattention while operating power

tools may result in serious personal injury.

2.

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.

  Loose clothes,

jewelry, or long hair can be caught in moving parts.

3.

Avoid accidental starting.

  

Be sure the Trigger is released before plugging

in. 

 Carrying power tools with your finger on the Trigger, or plugging in power tools

with the Trigger depressed, invites accidents.

4.

Remove adjusting keys or wrenches before using the power tool.  

A wrench or

a key that is left attached to a rotating part of the power tool may result in personal
injury.

5.

Do not overreach.  Keep proper footing and balance at all times. 

 Proper footing

and balance enables better control of the power tool in unexpected situations.

6.

Use safety equipment.  

Always wear ANSI approved safety glasses underneath

a full face safety shield.  Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.

7.

Use clamps (not included) or other practical ways to secure and support
the workpiece to a stable platform.

  Holding the work by hand or against your

body is unstable and may lead to loss of control.

Содержание 93142













Отзывы: