background image

SKU 92920 and 92907     

For technical questions please call 1-800-444-3353

  

 Page 5

Unpacking

When unpacking, check to make sure that the product is intact and undamaged.

1/2” Drive Cordless Impact Wrench (18v or 24v depending on the model purchased)
Rechargeable Battery
Plastic Storage Case

If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.

NOTE: Batteries will not reach full
charge the first time they are charged.
Allow several cycles (operation followed
by recharging) before the battery will
become fully charged.

Battery Temperature Warning:

WARNING: Battery explosion may
cause serious personal or property
injury including death. Charge the
battery only within a 50° to 100° tem-
perature range. Lower temperatures
may inhibit charging. Higher tempera-
tures increase chance of battery failure,
including explosion.

Battery Charger Safety:

1.

Charge the battery pack only with the included charger. Use of other chargers

may cause battery failure including explosion.

2.

Ensure that the battery charger is connected to a 120 VAC, 60Hz power

supply with circuit breaker only.

Using the Battery Charger

Содержание 92907










Отзывы: