background image

Page 2

For technical questions, please call 1-800-444-3353.

Item 69684 

        

Table of Contents

Safety ......................................................... 3
Specifications ............................................. 6
Setup .......................................................... 7
Operation ................................................... 10

Maintenance .............................................. 14
Parts List and Diagram .............................. 17
Warranty .................................................... 20

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Содержание 69684





















Отзывы: