maintenanCe and
SerViCing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
to preVent
SeriouS injurY
From aCCidental
operation:
turn the tool off and unplug
the tool from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
to preVent SeriouS
injurY From tool
Failure: do not use
damaged equipment. if
abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, maintenance, and
lubrication
beFore eaCH uSe,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
aFter uSe,
2.
clean external surfaces
of the tool with a clean, moist cloth.
To prevent accidents, turn off the
tool and disconnect its power supply
after use. Clean, then store the tool
indoors out of children’s reach.
If the blade has become dirty, use a
3.
blade cleaner (not included) to clean
it. Dirty blades will bind more easily,
and will more often overheat and
burn the wood as it cuts. Overheated
blades dull more easily.
If the Blade has become dull, replace it.
4.
Dull blades will cause increased tear-
out and ragged edges on the cuts.
Occasionally clean the Slides,
5.
rotating Table components and other
moving parts. Use a good quality dry
lubricant (not included) which will not
attract dust.
warning!
If the supply cord of this
power tool is damaged, it must be
replaced only by a qualified service
technician.
replacing the blade
to reduCe riSk
oF SeriouS
injurY: wear gloves when
installing or removeing the
saw blade. return guard to
original position and secure in
place after replacing blade.
Unplug the tool from its power
1.
source.
To lock the blade assembly in the
2.
raised position, pull down the saw
head and pull out the saw head
Locking Pin (66). Rotate the Pin into
the shallow groove. Pull up the saw
head until it locks into the raised
position.
warning
warning
Page 14
For technical questions, please call 1-800-444-3353.
SKU 67411
