SKU 66876
For technical questions, please call 1-800-444-3353.
Page 13
assembly
installing the side Handle
to preVent
serious injurY:
do not operate this tool with
one hand only or without the
side Handle properly
installed.
Side Handle (31)
Gear Box (27)
Figure 3
1. The Side Handle (31) may be in-
stalled on either side of the Gear Box
(27).
Thread the Side Handle clockwise
2.
into the selected position.
Tighten securely before beginning
3.
work.
adjusting the wheel guard
to preVent
serious injurY:
do not operate this tool
without the wheel guard
properly installed and
positioned.
Wheel Guard (16)
Wheel Guard
Bolt (20)
Figure 4
1. The Wheel Guard comes installed on
the Grinder. To adjust the placement
of the Wheel Guard:
Using the included Hex Wrench,
a.
loosen the Wheel Guard Bolt (20).
Rotate the Wheel Guard as needed
b.
for the planned work.
Tighten the Wheel Guard Bolt se-
c.
curely.
Check the Wheel Guard to ensure it
2.
is firmly in place. Adjust again if nec
-
essary before proceeding.
