SKU 66672
For technical questions, please call 1-800-444-3353.
Page 15
OpERATing inSTRuCTiOnS
Read the EnTiRE impORTAnT
SAFETY inFORmATiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Work piece and Work Area Set up
Designate a work area that is clean
1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Secure loose work pieces using a
2.
vise or clamps (not included) to pre-
vent movement while working.
There must not be hazardous ob-
3.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
gEnERAL OpERATing
inSTRuCTiOnS
TO pREVEnT
SERiOuS injuRY:
Grip the tool firmly in both
hands.
Figure 10
Battery
Grinder
Button
1. Install the charged Battery onto the
Grinder - See Figure 10.
Depress the Switch (28) to start the
2.
Grinder.
Allow the tool to come up to full
3.
speed before touching the work ma-
terial.
Apply the wheel to the work mate-
4.
rial, allowing the tool to operate at
full speed. If the tool bogs down, use
lighter pressure.
To create a smoother surface, keep
5.
the tool moving over the work sur-
face.
Release the Switch to stop the tool.
6.
Allow the tool to come to a complete
7.
stop before setting it down.
To prevent accidents, turn off the tool
8.
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of reach of children
