SKU 66660
For technical questions, please call 1-800-444-3353.
Page 12
SpeCIFICatIonS
Electrical Requirements
120 V~ / 60 Hz / 15 A
Power Cord Type
Double Insulated
Polarized
Motor No Load Speed
4500 RPM
Blade Diameter
7-¼” Diameter
Arbor Size and Type
5/8” Diamond Type
Left Hand Thread
13mm Bolt Head
Maximum Cutting Depth
2-1/2” at 90°
1-3/4” at 45°
Lubricating Oil
Mobil SHC 636
(15ml) 0.51 Oz.
UnpaCKInG
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
List of contents
description
Q’ty
Worm Drive Saw
1
Carbide Tipped Blade
1
13mm Arbor Wrench
1
InStrUCtIonS For
pUttInG Into USe
read the entIre Important
SaFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to preVent
SerIoUS InjUrY
From aCCIdentaL
operatIon:
turn the power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
assembly
Before use, you must install the Saw
1.
Blade (43).
Be sure the tool is unplugged.
2.
Press in and hold the Spindle Lock
3.
Pin (14).
Using the a 6mm Hex Key, remove
4.
the Arbor Bolt (46) and Arbor Wash-
ers (44 and 45). NOTE: The Arbor
Bolt (46) has left hand threads.
Place the Saw Blade (43) on the
5.
Arbor (25). Be sure to match the rota-
tion direction marked on the Blade
with the arrow embossed on the
Lower Blade Guard (37).
Replace the Arbor Washers (44 and
6.
45) as shown in the Assembly Dia-
gram.
Replace the Arbor Bolt (46). Tighten
7.
securely.
Before operation make sure that the
8.
Spindle Lock (14) is released. Turn
the blade by hand to check the Spin-
