Chicago Electric 66439 Скачать руководство пользователя страница 3

Page 3

SKU 66439

For technical questions, please call 1-800-444-3353.

Do not touch the bulb at any time. 

8. 

Use a soft cloth. Oil from skin may 

damage bulb. 
Do not operate the Light with a miss-

9. 

ing or damaged housing (3), lens 

(21), or grid (23).  (See assembly 

diagram.)
Risk of electric shock.  Do not use 

10. 

with extension cord near water or 

where water may accumulate.  Keep 

lamp at least 16 feet (5m) from pools 

and spas.  Keep plugs and recep-

tacles dry.  For use only on GFCI-

protected circuits.  Suitable for wet 

location use.
Maintain labels and nameplates on 

11. 

the Light.  These carry important 

safety information.  If unreadable or 

missing, contact Harbor Freight Tools 

for a replacement.
Avoid unintentional starting.  Prepare 

12. 

to begin work before turning on the 

Light.
Allow the unit to cool down before 

13. 

changing bulbs or storing it. 
This product is not intended for use 

14. 

in a residence or to be mounted in a 

cabinet.  This product is not suitable 

for recessed installation in ceilings or 

on buildings.  This product can cause 

a fire.

Do not let cord hang over edge of 

15. 

table or counter, or touch hot sur-

faces.
Do not leave the Light unattended 

16. 

when it is plugged into an electrical 

outlet.  Turn off the Light, and unplug 

it from its electrical outlet before leav-

ing.

This product is not a toy.  Keep it out 

17. 

of reach of children.
People with pacemakers should 

18. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should:

Avoid operating alone.

• 

Properly maintain and inspect to 

• 

avoid electrical shock.
Any power cord must be properly 

• 

grounded.  Ground Fault Circuit 

Interrupter (GFCI) should also be 

implemented – it prevents sustained 

electrical shock.

WARNING: Handling the cord on 

19. 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and birth 

defects or other reproductive harm. 

Wash hands after handling. 

(California Health & Safety Code § 

25249.5, 

et seq.

)

The warnings, precautions, and in-

20. 

structions discussed in this instruction 

manual cannot cover all possible con-

ditions and situations that may occur.  

It must be understood by the operator 

that common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.

general Safety rules

work area safety

1. 

Keep work area clean and well lit.  

a. 

Cluttered or dark areas invite acci-

dents.

Содержание 66439













Отзывы: