background image

SKU 66182 

For technical questions, please call 1-800-444-3353. 

Page 5

People with pacemakers should 

11. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone.

 

• Do not use with Power Switch (19) 

locked on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any Power Cord (21) must be prop

-

erly grounded.  Ground Fault Circuit 

Interrupter (GFCI) should also be 

implemented – it prevents sustained 

electrical shock.
WARNING: Handling the Powr Cord 

12. 

(21) on this product will expose you 

to lead, a chemical known to the 

State of California to cause cancer, 

and birth defects or other reproduc-

tive harm. Wash hands after han-

dling.  (California Health & Safety 

Code §  25249.5, et seq.)
The warnings, precautions, and in-

13. 

structions discussed in this instruction 

manual cannot cover all possible con-

ditions and situations that may occur.  

It must be understood by the operator 

that common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.

  SAVE THESE 

INSTrUcTIONS.

grOUNDINg

 

TO prEVENT 

ElEcTrIc SHOcK 

AND DEATH FrOm 

INcOrrEcT grOUNDINg 

WIrE cONNEcTION: 

Check with a qualified 

electrician if you are in doubt 

as to whether the Outlet is 

properly grounded.  Do not 

modify the power cord plug 

(21) provided with the tool.  

Never remove the grounding 

prong from the plug.  Do not 

use the tool if the power cord 

or plug is damaged.  If 

damaged, have it repaired by 

a service facility before use.  If 

the Plug will not fit the Outlet, 

have a proper Outlet installed 

by a qualified electrician.

grounded Tools: Tools with Three 

prong plugs

Tools marked with “Grounding Re-

1. 

quired” have a three wire cord and 

three prong grounding plug.  The 

plug must be connected to a properly 

grounded outlet.  If the tool should 

electrically malfunction or break 

down, grounding provides a low re-

sistance path to carry electricity away 

from the user, reducing the risk of 

Содержание 66182












Отзывы: