SKU 65756
For technical questions, please call 1-800-444-3353.
Page 7
speciFicatiOns
Battery Charger
Input
120 VAC / 60 Hz
Battery Type
NiCd, 19.2 V, 1.7 Ah
Battery Charging
Time
5 Hours Max.
Drill
Specifications
0-350 RPM / 0-1,300
RPM; Variable Speed;
Reversible; 24 Torque
Settings; Pistol Grip;
Squeeze Trigger
unpacKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
list of contents
description
Q’ty
2-Speed Drill
1
AC/DC Charger Base
1
1/4", 3/16", 5/32", 1/8", 3/32" &
1/16" Drill Bits
6
NiCd, 19.2 V, 1.7 Ah
Battery
1
1/4" and 3/16" slotted, #1 and #2
ponzi, P1 and P2 Bits
6
read the entire impOrtant saFetY
inFOrmatiOn section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
tO preVent
seriOus injurY
FrOm accidental
OperatiOn:
turn the power switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
product Features
nOte:
For additional information regarding
the parts listed in the following pages, refer
to the
assembly diagram
on
page 12
.
1.
Warning!
Always make sure
the Trigger of the Cordless Drill is in
its
“OFF”
position, the Battery Pack
(22) is removed from the Cordless
Drill, and the Charger (26) is un-
plugged from its electrical outlet prior
to making any adjustments to the
tool.
(see Figure a on page 8)
chuck (11)
2.
:
Accepts up to 3/8”
shank
diameter Drill Bits (not included). To
install a Drill Bit with the Cordless
Drill pointed away from your body,
hold the Chuck Sleeve firmly in place
and turn the Chuck
clockwise
. Insert
the shank of a Drill Bit all the way into
the Chuck. While holding the Chuck
Sleeve in place, turn the Chuck
coun-
terclockwise
to lock the Drill Bit in
place.
(see Figure a on page 8)
REV 09b
