SKU 65463
For technical questions, please call 1-800-444-3353.
Page 10
There must not be hazardous ob-
3.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
general operating instructions
This tool has one control, the “ON/
1.
OFF” Rocker Switch (20). (See Fig. 2.)
Fig. 2
a. Make sure the Rocker Switch is in
the “OFF” position (the “O” on the
lower half of the Rocker Switch is
OFF) before plugging this tool into a
power source.
Holding the handle firmly, push the
b.
upper half of the Rocker Switch (20)
marked with the “I”, to turn the Blow-
er Dryer on.
caution:
Be prepared for a slight twisting
motion of the tool as the motor comes
up to speed. This is a reaction from
the torque of the motor starting up.
Make sure the Rocker Switch (20) is
c.
in the “OFF” position when finished
using, and unplug from the power
source.
This Blower Dryer can be used with-
2.
out attachments, or with any of the
three Nozzles supplied with it.
Fig. 3
Tapered
Nozzle (27)
Conical Rubber
Nozzle (26)
Fan Nozzle (28)
a. Review the three Nozzles and deter-
mine which will best suit the task at
hand.
Take the selected Nozzle and slip it
b.
onto the output port of the Blower
Dryer. Note: The Tapered Nozzle
has 4 diffusers to reduce air velocity
exiting the nozzle.
Turn off the tool when done. To pre-
3.
vent accidents, make sure the Dryer
is off and disconnected from the
power source. Clean, and store the
tool indoors out of children’s reach.
