Chicago Electric 62421 Скачать руководство пользователя

Страница: 1 / 16

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

ITEM 62427

18 VOLT CORDLESS

DRILL/DRIVER

WITH 1/2" CHUCK

REV 14h

Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2014 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Содержание 62421

















Результаты поиска

Содержание 62421

Отзывы:

Похожие инструкции для 62421

Бренды по названию

Популярные бренды

Chicago Electric 62421, Руководство пользователя

Результаты поиска

Содержание 62421

Отзывы:

Похожие инструкции для 62421

Бренды по названию

Популярные бренды