Page 10
For technical questions, please call 1-888-866-5797.
Item 61481
SAFET
y
O
PERA
TION
M
AINTENANCE
SETUP
Work Piece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Setting Up an Angle Cut
1. To cut at various angles (up to 45º),
adjust the Angle Scale (35) by loosening the
two Bolts (41) as shown in
Figure F
.
2. Adjust the Angle Scale to the desired
setting and then tighten both Bolts.
3. To reposition the Angle Scale for a wider workpiece,
remove both of the Bolts, and reattach the Angle
Scale at the upper two screw holes. See
Figure F
.
Bolts (41)
Angle
Scale
(35)
Upper Two Screw Holes
Figure F: Angle Scale
