background image

SKU 45005 

For technical questions, please call 1-800-444-3353. 

Page 5

ply could possibly cause battery 

explosion. Battery Charger should 

be plugged into a surge protection 

device.
People with pacemakers should 

17. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemaker 

failure.  
WARNING: Handling the cord on 

18. 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and birth 

defects or other reproductive harm. 

Wash hands after handling.  (Califor-

nia Health & Safety Code §  25249.5, 

et seq.

)

GROUnDinG

 

improperly 

connecting the 

grounding wire can result in 

electric shock.

  Check with a qualified 

electrician if you are in doubt 

as to whether the outlet is 

properly grounded.  Do not 

modify the power cord plug 

provided with the tool.  never 

remove the grounding prong 

from the plug.  Do not use the 

tool if the power cord or plug 

is damaged.  if damaged, have 

it repaired by a service facility 

before use.  if the plug will not 

fit the outlet, have a proper 

outlet installed by a qualified 

electrician.

Grounded Tools: 

Tools with Three Prong Plugs

1.  Tools marked with “Grounding Re-

quired” have a three wire cord and 

three prong grounding plug.  The 

plug must be connected to a properly 

grounded outlet.  If the tool should 

electrically malfunction or break down, 

grounding provides a low resistance 

path to carry electricity away from 

the user, reducing the risk of elec-

tric shock.  

(See 3-Prong Plug and 

Outlet.)

The grounding prong in the plug is 

2. 

connected through the green wire in-

side the cord to the grounding system 

in the tool.  The green wire in the cord 

must be the only wire connected to 

the tool’s grounding system and must 

never be attached to an electrically 

“live” terminal.  

(See 3-Prong Plug 

and Outlet.)

The tool must be plugged into an 

3. 

appropriate outlet, properly installed 

and grounded in accordance with all 

codes and ordinances.  The plug and 

outlet should look like those in the 

preceding illustration.  

(See 3-Prong 

Plug and Outlet.)

Extension Cords

Grounded

1. 

 tools require a three wire 

extension cord.  

Double Insulated

 

REV 07g, 08j

Содержание 45005











Отзывы: