Page 4
SKU 43471
for technical questions, please call 1-800-444-3353.
Maintenance. For your safety, maintenance should be performed regularly by a quali-
fied technician.
there are certain applications for which this tool was designed. This tool shall not
be modified and/or used for any application other than which it was designed.
All accessories must be rated for at least the RpM speed recommended on the
tool’s warning label. Wheels and other accessories running over rated speed can fly
apart and cause injury.
for safe operation, only these accessories can be used with this product:
Abrasive Cut-Off Discs and Wheels Flap Wheels
Wire Brushes
Wire Wheel Brushes
Always use an approved and proper guard when using the above mentioned ac-
cessories. Each accessory must have the correct arbor size and must fit properly
on the shoulder bushing. Make sure accessories are tightened down securely.
NEVER INstALL A cIRcuLAR sAw bLADE fOR usE ON tHIs ANGLE GRINDER.
NEVER INstALL A wOOD cARVING bLADE, cARVING DIsc wItH sAw cHAIN
cuttERs, OR A cuttING cARVING DIsc ON tHIs ANGLE GRINDER.
warning! Always use an approved and proper guard when using the recom-
mended accessories (listed on page 5). Each accessory must have the correct
arbor size and must fit properly on the shoulder bushing. Make sure accessories
tightened down securely. Never install a carbide tipped or steel circular saw blade
for use on this Angle Grinder. Never install a wood carving blade, carving disc
with saw chain cutters, or cutting-carving disc.
wARNING: some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contains chemicals known [to the state of califor-
nia] to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
(California Health & Safety Code § 25249.5,
et seq.
)
warning: the warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Note: Performance of this tool (if powered by line voltage) may vary depending on variations
in local line voltage. Extension cord usage may also affect tool performance.
21.
22.
23.
24.
25.
26.
27.
28.
29.
