background image

UB-1000  uses 2 pieces of " AA " size batteries (Alkaline battery is recommended ). To install or 
remove the batteries, press the release buttons at the edges of the transmitter to open or close the 
cover as illustrated ( Fig.1 ). When  installing the batteries with the cover open toward you, the cover 
might block your hand. It is thus recommended that while inserting or removing the batteries please 
hold  the  transmitter  in  such  a  way  that  the  cover  open  away  from you. ( Fig.2 ) 
 

8

9

11

Antenna
Battery weak / audio mute indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Mini USB port
Cover release button
Charging contacts
Lavalier microphone
Mic clip

12

13

14

LCD Display Multi-channel UHF/VHF Wireless Microphone 
System.

Operating Instructions

Transmitter UH-1000 / UB-1000

LCD Displays

Both handheld ( UH-1000 ) and beltpack ( UB-1000 ) have the same display 
pages and operating procedures.
Viewing of  the various pages in the LCD display
First press power 

ON 

switch for about 2 seconds and release the button,the 

following page will appear:

Remark : Brand name and model number is factory fixed and not user-changeable.

Press UP or DOWN button to view the next page

Remark : User or Owner name is 
                 user-changeable.

Press UP or DOWN button to view the next page
Remark : GP ( Group ) & CH 
                 ( Channel ) is user
                 -selectable.

CHIAYO
UH-1000

CHIAYO
UH-1000

 USER

  NAME

 USER NAME

 

C F : 0 1 - 0 1

CHIAYO
UH-1000

CH : 01-01
     800.000

CH : 01-01
     800.000

CH : 01-01
     800.000

CF : 01-01
    740.000

Содержание UB-1000











Отзывы: